Panasonic FP Web-Server Hardware And Configuration Manual Download Page 146

Page: 146 / 195

Dial-in setup for PPP server

FP Web-Server V2.810 EN

145

14.2 Dial-in inputs and parameters for PPP server

In the following, the input fields of the "Dial-In" tab of the Configurator for

the PPP server configuration are described.

For context-sensitive help, highlight the button or entry field (using

<Tab>) and press <F1>.

Comments:



The PPP-Client has to be set up in such a way that it accepts the remote

IP address from the PPP server.



The modem and the transparent TCP/ RS232C port cannot be used at

the same time (except when a second FP Web-Server unit is used).



The modem has to be connected to the 9-pin RS232C port of the FP

Web-Server. The modem must be set up to support the RTS/CTS flow

control.



For a detailed description of the cables refer to PLC Connection, Cable

Drawings, Modem (see p. 174).

Summary of Contents for FP Web-Server




































































































































































































Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands

Panasonic FP Web-Server, Hardware And Configuration Manual

Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands