FF1: System Programming
Section 400-Programming
Page 1-142
●
DBS 576 (USA) issued 05/20/98
576-13-400
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
0
System
Configuration
FF7
Applications
FF8
Maintenance
Introduction
Appendix A
Appendix B
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
0
System
Configuration
FF7
Applications
FF8
Maintenance
Introduction
Appendix A
Appendix B
Notes:
Related Programming:
ARS/LCR Setting (pg. 1-27) FF1 0 02 0010 Hold (0 or 1) Hold
Notes:
Interdigit Timer (DTMF SLTs)
(all CPCs) - Version 1.0 or higher
Set how long the system will wait between dialed digits on a DTMF SLT
before it sends a re-order tone.
(all CPCs) - Version 1.3 and higher:
This address does not apply to calls routed through ARS.
See Interdigit Timer (ARS and ISDN CO) on pg. 1-120 for ARS-routed calls.
FF1 1 03 0007 Hold (0-255) Hold
0 = no check (system waits indefinitely)
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
default: 15 seconds
%
5%$7
Interdigit Timer (Digital Keyphones)
(all CPCs) - Version 1.0 or higher
Set how long the system will wait between dialed digits on a digital keyphone
before it sends a re-order tone.
(all CPCs) - Version 1.3 and higher:
This address does not apply to calls routed through ARS.
See Interdigit Timer (ARS and ISDN CO) on pg. 1-120 for ARS-routed calls.
FF1 1 03 0008 Hold (0-255) Hold
0 = no check (system waits indefinitely) (default)
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
3%*5