Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 96 / 174

Basic screen [Basic]

System screen [System]

System status

Frequency

The frame frequency setting is displayed.

Format

The video format setting is displayed.

Shooting Mode

The shooting mode setting is displayed.

Color Setting

Displays the color (gamma and gamut) setting for the system as a

whole.

Genlock

Horizontal Phase

The horizontal phase setting during genlock is displayed.

Wireless Control

The wireless remote control setting is displayed.

Fan

Fan1

The setting for the cooling fan near the lens is displayed.

Fan2

The setting for the cooling fan near the pan-tilt head is displayed.

Output

12G SDI/OPTICAL

The output setting for the 12G SDI OUT connector <12G SDI OUT>

is displayed.

3G SDI

The output setting for the 3G SDI OUT connector <3G SDI OUT> is

displayed.

MONI

The output setting for the MONITOR OUT connector <MONI OUT> is

displayed.

HDMI

The output setting for the HDMI connector <HDMI> is displayed.

Pan/Tilt

Install Position

The install position setting is displayed.

Smart Picture Flip

The smart picture flip setting is displayed.

P/T Speed Mode

The P/T speed mode setting is displayed.

Speed With Zoom Position

The settings for the function to adjust the speed of pan/tilt adjustment

are displayed in conjunction with the zoom magnification.

Focus Adjust With PTZ.

The settings for the function to compensate for poor focus when using

pan/tilt/zoom are displayed.

Frequency

Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]

This item is selected to switch the frame frequency.

The setting is confirmed with the [Set] button.

Factory settings:

59.94Hz (AW-UE150WP/AW-UE150KP)

50Hz (AW-UE150WE/AW-UE150KE)

<NOTE>

• When the frame frequency is switched, the unit automatically

restarts.

Format

For [59.94Hz]

2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,

1080/29.97PsF, 1080/23.98p(59.94i)

, 720/59.94p

For [50Hz]

2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,

720/50p

For [24Hz]

2160/24p, 1080/24p

For [23.98Hz]

2160/23.98p, 1080/23.98p, 1080/23.98PsF

The video format is changed on this screen.

The setting is confirmed with the [Set] button.

It denotes “1080/23.98p over 59.94i”.

<NOTE>

• In order to select [H.264(UHD)], [H.265(UHD)], [JPEG(UHD)],

[SRT(H.264 UHD)], and [SRT(H.265 UHD)] in [Streaming mode] for

[Video over IP], you need to select the 4K format here.

Web screen configurations (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands