Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 66 / 174

Output 4/9 screen

Output 4/9

HDMI

Format 2160/59.94p

HDR Output Select HDR(2020)

V-Log Output Select V-Log

Video Sampling 4:2:2/10bit

Return

HDMI

Make the settings for output from the HDMI connector.

Format

Set the output format.

The following format settings are possible depending on the [Format]

setting in the [System 1/2] screen.

Frequency

System Format

Format (HDMI)

59.94Hz

2160/59.94p

1080/59.94p

2160/29.97p

1080/29.97p

1080/59.94p

1080/59.94i

1080/29.97p

1080/29.97PsF

1080/29.97p

1080/23.98p(59.94i)

1080/23.98p(59.94p)

720/59.94p

50Hz

2160/50p

1080/50p

2160/25p

1080/25p

1080/50p

1080/50i

1080/25p

1080/25PsF

1080/25p

720/50p

24Hz

2160/24p

1080/24p

23.98Hz

2160/23.98p

1080/23.98p

1080/23.98PsF

1080/23.98p

It denotes “1080/23.98p over 59.94i”.

When [UHD Crop] is [Crop(720)], output is 720/59.94p.

It denotes “1080/23.98p over 59.94p”.

When [UHD Crop] is [Crop(720)], output is 720/50p.

HDR Output Select [SDR, HDR(2020), HDR(709)]

Select the signal to be output when [Gamma Mode] is [HLG].

SDR

SDR output

HDR(2020)

HDR output (BT.2020 equivalent color gamut)

HDR(709)

HDR output (BT.709 equivalent color gamut)

<NOTE>

• Other than when [Gamma Mode] is [HLG], [Color Setting] is

[Normal], and [Video Sampling] is [4:2:2/10bit], [HDR Output Select]

cannot be changed. (→ page 52, page 57)

V-Log Output Select [V-Log, V-709]

Select the signal to be output when [Color Setting] is [V-Log].

V-Log

Output with a gamma curve that has a wide range of

tones and latitude (exposure range).

V-709

Converted for output to images suited to previewing.

<NOTE>

• [V-Log Output Select] cannot be changed when [Color Setting] is

not [V‑Log]. (→ page 57)

Video Sampling [4:2:2/10bit, 4:2:0/8bit]

When [Format] in [HDMI] is [2160/59.94p] or [2160/50p], select the

video sampling output from the HDMI connector.

4:2:2/10bit

Output in 4:2:2/10bit mode.

4:2:0/8bit

Output in 4:2:0/8bit mode.

<NOTE>

• When [Format] in [HDMI] is other than [2160/59.94p] or [2160/50p],

[Video Sampling] cannot be changed and is fixed at [4:2:2/10bit].

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands