Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 77 / 174

HDMI Status screen

HDMI Status

Connect

　HDMI

Format 2160/59.94p

Video Sampling YPbPr 4:2:2/10bit

HDR Output HLG(2020)

Monitor Available

Return

Connect

Displays the connection status of the HDMI connector.

One of the following is displayed according to the product

specifications of the device or monitor connected.

Unconnect

Not connected.

HDMI

Connected via HDMI.

DVI

Connected via DVI.

Format

Displays the format of the images being output via the HDMI

connector.

The same format is displayed as is specified in [Format] in [HDMI] in

the [Output 4/9] screen.

Video Sampling

The video sampling of the images being output via the HDMI

connector is displayed.

One of the following is displayed according to the menu settings and

the product specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

RGB 8bit

Displayed when [Connect] is HDMI and output is RGB

8bit.

YPbPr 4:2:2/

10bit

Displayed when [Connect] is HDMI and output is

YPbPr 4:2:2/10bit.

YPbPr 4:2:0/

8bit

Displayed when [Connect] is HDMI and output is

YPbPr 4:2:0/8bit.

<NOTE>

• Even if the video sampling is set in [Video Sampling] in [HDMI]

in the [Output 4/9] screen, it may not be possible to output using

the specified format due to the product specifications of the HDMI

connected device or monitor.

This item displays the status of the video sampling actually being

output.

HDR Output

The HDR signal status of the images being output via the HDMI

connector is displayed.

One of the following is displayed according to the product

specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

SDR(709)

Displayed when [Connect] is HDMI and output is

SDR(709).

HLG(2020)

Displayed when [Connect] is HDMI and output is

HLG(2020).

HLG(709)

Displayed when [Connect] is HDMI and output is

HLG(709).

Monitor

Displays the status of the device or monitor connected to the HDMI

connector.

One of the following is displayed according to the product

specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

Available

This indicates that [Connect] is HDMI and the

device or monitor connected supports the format

output by this unit.

Unsupport UHD

This indicates that [Connect] is HDMI and the

device or monitor connected does not support the

format output by this unit.

Unsupport UHD

60p/50p
Unsupport UHD

60p 4:2:2
Unsupport UHD

50p 4:2:2
Unsupport UHD

60p 4:2:0
Unsupport UHD

50p 4:2:0
Unsupport

HLG/2020
Unsupport HLG
Unsupport 2020
Unsupport Format This indicates that [Connect] is HDMI and the

device or monitor connected is not supported for a

reason other than those shown above.

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands