Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 103 / 174

Speed With Zoom Position [Off, On]

[Off] or [On] is set here for the function used to adjust the pan-tilt

adjustment speed in conjunction with the zoom magnification.

When [On] is set, the panning and tilting operations will become

slower in the zoom status.

This function has no effect during preset operations.

Factory settings:

Focus Adjust With PTZ. [Off, On]

[Off] or [On] is set here for the function which compensates for out-of-

focusing when it occurs during panning, tilting or zooming operations.

When [Off] is set, adjust the focus as required after zooming or set

[Focus Mode] to [Auto].

This is only enabled when [Manual] has been selected as the [Focus

Mode] setting.

Factory settings:

Off

Power On Position [None, Standby, Home, Preset]

Select the initial positions for Pan/Tilt/Zoom when the power is turned

on.

None

Keep the positions of Pan/Tilt when the power was

last on, with Zoom being at the Wide end.

Standby

Move to the Pan/Tilt/Zoom positions they were in the

last time the camera was switched to Standby mode.

Home

Pan/Tilt move to their home positions (front) and

Zoom goes to the Wide end.

Preset

Preset playback is performed at the preset position

specified with [Preset Number].

Factory settings:

None

Preset Number [Preset001 to Preset100]

Specify a number for preset playback when the power turns ON when

[Preset] is set in [Power On Position].

Factory settings:

Preset001

<NOTE>

• If an unregistered preset number is set, preset playback is not

performed and the operation is the same as [None].

Date & time screen [Date&Time]

Make clock settings.

You can set using one of three types [PC Synchronization], [NTP], or

[Manual].

Auto

PC Synchronization

If you click the [Execute] button, the settings are configured by

synchronizing the unit to the date and time of the connected personal

computer.

<NOTE>

• The time zone of the personal computer is not reflected on the unit.

Set the time zone on the unit.

NTP

If you click “NTP>>”, the settings screen for the NTP server appears.

(→ page 136)

Manual

Date/Time

Configure the settings for the month, day, and year and for the hour,

minute, and second.

<NOTE>

• The time is in the 24-hour format.

Time Zone

Selects the time zone according to the region where the camera is

being used.

Factory settings:

(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London

102

103

Web screen configurations (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands