Black Gamma [–8 to +8]
Set the gamma curve for dark areas.
–8 to –1
Compresses dark parts.
1 to 8
Expands dark parts.
Factory settings:
0
Black Gamma Range [1 to 3]
Set the maximum level of compression/expansion.
1
Around 20%
2
Around 30%
3
Around 40%
Factory settings:
1
DRS [Off, Low, Mid, High]
Set the DRS function which performs correction when video with high
light/dark contrast is displayed.
You can select from a [Low], [Mid], or [High] effect level.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Factory settings:
Off
Knee Mode [Off, Auto, Manual]
Set the operating mode for gradation compression (knee).
Off
Turn the knee function off.
Auto
Enable the knee function, and set the knee point and knee
slope automatically.
Manual
Enable the knee function, and set the knee point and knee
slope manually.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This cannot be set when the [Color Setting] is [V-Log].
All of the following Knee Mode items also cannot be set when [Color
Setting] is [V-Log].
Factory settings:
Auto
Auto Knee Response [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Factory settings:
4
Knee Point [70.0% to 107.0%]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [Knee Mode] is set to [Manual].
Factory settings:
93.0%
Knee Slope [0 to 99]
Set the knee slope.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [Knee Mode] is set to [Manual].
Factory settings:
99
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
HLG Knee [Off, On]
Enable or disable the operation of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
This cannot be set when the [Color Setting] is [V-Log].
All of the following HLG Knee items also cannot be set when [Color
Setting] is [V-Log].
Factory settings:
Off
HLG Knee Point [55% to 100%]
Set the position of the HLG knee point.
This is only enabled when [Gamma Mode] is set to [HLG].
Factory settings:
55%
HLG Knee Slope [0 to 100]
Set the slope of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
Factory settings:
10
White Clip [Off, On]
Turn the white clip function off/on.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This cannot be set when the [Color Setting] is [V-Log].
All of the following White Clip items also cannot be set when [Color
Setting] is [V-Log].
Factory settings:
On
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [White Clip] is set to [On].
Factory settings:
109%
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Factory settings:
Low
120
121
Web screen configurations (continued)
