Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 114 / 174

Audio setting screen [Audio]

Configure audio settings.

<NOTE>

• Images and audio are not synchronized. Therefore, images and audio

may be slightly out of sync.

• The audio may skip depending on the network environment.

Setting status

Audio

The setting status of audio input is displayed.

Input Type

The setting status of the audio input type is displayed.

Volume Level

The setting status of audio output volume is displayed.

Plugin Power

The setting status of audio plugin power is displayed.

Audio over IP

Audio transmission

The setting status of audio data IP transmission is displayed.

Audio bit rate

The bit rate setting status for audio data via IP transmission is

displayed.

Audio

The setting is confirmed with the [Set] button.

Audio

[Off, On]

Turn audio input off/on.

Factory settings:

Off

Input Type [Mic, Line]

Mic

Set the microphone input.

Line

Set the line input.

This is only enabled when [Audio] is set to [On].

Factory settings:

Line

Volume Level [–36dB to +12dB]

Set the volume of audio output.

This is only enabled when [Audio] is set to [On].

Factory settings:

0dB

Plugin Power [Off, On]

Turn the plugin power for the audio off/on.

This is only enabled when [Audio] is set to [On].

This is only enabled when [Input Type] is set to [Mic].

Factory settings:

Off

Audio over IP

The setting is confirmed with the [Set] button.

Audio transmission [Off, On]

Set the communication mode used to transmit audio data to a

personal computer, etc.

Off

Do not transmit audio data. All settings and controls

related to audio will be disabled.

Transmit audio data.

This allows audio as well as images to be viewed on

the personal computer.

Factory settings:

Audio bit rate [64kbps, 96kbps, 128kbps]

Set the bit rate for transmitting audio.

Factory settings:

128kbps

114

Web screen configurations (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands