Image adjust screen [Image adjust]
Adjust the image quality.
The settings in this screen (with the exception of [Scene] and [Matrix])
are applied immediately. After selecting the settings for [Scene] and
[Matrix], you need to press the [Set] button to execute.
Scene [Scene1, Scene2, Scene3, Scene4]
Switch the shooting mode depending on the shooting environment.
Select a shooting mode based on the shooting conditions or
preference.
Select a shooting mode from the pull-down menu, and click the [Set]
button to switch to the selected mode.
Scene1
Scene2
Scene3
Scene4
Modes that allow you to adjust detailed settings manually
for various shooting conditions and preferences.
Factory settings:
Scene1
Camera control/Setup Menu button
You can display the camera control screen by clicking the [Camera
control] button.
You can control the camera while adjusting the image quality.
z
Brightness
Picture Level [–50 to +50]
This menu item is selected to set the target picture level for automatic
exposure compensation.
Its setting takes effect when [Auto] or [ELC] has been selected as
the setting for any of the following automatic exposure compensation
functions.
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
Factory settings:
0
Iris Mode [Manual, Auto]
This menu item is used to select whether the iris is to be adjusted
automatically or manually.
Manual
The iris is adjusted manually.
Auto
Auto exposure compensation is performed so that
the target level which was set using [Picture Level] is
reached.
Factory settings:
Auto
Auto Iris Speed [Slow, Normal, Fast]
Set the control speed of the auto iris function.
Slow
Control the iris at a slow speed.
Normal
Control the iris at a normal speed.
Fast
Control the iris at a fast speed.
Factory settings:
Normal
Auto Iris Window [Normal1, Normal2, Center]
Select the detection window for the auto iris.
Normal1
Window towards the center of the screen.
Normal2
Window towards the bottom of the screen.
Center
Spotted window in the center of the screen.
Factory settings:
Normal1
Auto Iris Close Limit [Normal, F8, F7, F5.6]
Sets the limit value for the CLOSE side in auto iris.
Normal
Moves up to the normal position (the vicinity of F9).
F8
The limit is in the vicinity of F8.
F7
The limit is in the vicinity of F7.
F5.6
The limit is in the vicinity of F5.6.
Factory settings:
Normal
114
115
Web screen configurations (continued)
