Panasonic AW-UE150KE Operating Instructions Manual Download

Page: 51 / 174

Picture 4/8 screen

Picture 4/8

Skin Detail Off

Skin Detail Effect 16

Return

Skin Detail [Off, On]

This function smooths skin and produces a more beautiful image.

This is only enabled when [Detail] is set to [On].

This cannot be set when the [Color Setting] is [V-Log].

All of the following Skin Detail items also cannot be set when [Color

Setting] is [V-Log].

Skin Detail Effect [0 to 31]

The skin of human subjects appears smoother the larger the setting

value.

This is only enabled when [Detail] is set to [On] and [Skin Detail] is set

to [On].

Return

Return to the previous menu level.

Picture 5/8 screen

Picture 5/8

DownCon Detail On

DC. Master Detail —20

DC. Detail Coring 15

DC. V Detail Level 7

DC. Detail Frequency 0

DC. Level Depend. 0

DC. Knee Aperture Level 2

Return

DownCon Detail [Off, On]

Turn on/off the contour (sharpness of images) adjustment of images

down-converted from 4K to HD.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This cannot be set when the [Color Setting] is [V-Log].

All of the following DownCon Detail items also cannot be set when

[Color Setting] is [V-Log].

DC. Master Detail [–31 to +31]

Adjust the contour correction level (master) for images down-

converted from 4K to HD.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

DC. Detail Coring [0 to 60]

Set the level of the signal (including noise) which makes the detail

effect not work for images down-converted from 4K to HD.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

DC. V Detail Level [–7 to +7]

Adjust the contour correction level in the vertical direction for images

down-converted from 4K to HD.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

DC. Detail Frequency [–2 to +2]

Set the boost frequency of detail for images down-converted from 4K

to HD.

–2

: Low frequency

: High frequency

When a high frequency is selected, the detail effect is added to

subjects with more definition.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

Camera menu items (continued)

Summary of Contents for AW-UE150KE















































































































































































Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands

Panasonic AW-UE150KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KE

Reviews:

Related manuals for AW-UE150KE

Brands by name

Popular brands