Panasonic AV-UHS500, Operating Instructions Manual

Page: 178 / 188

178
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Config GPI-In Port2/2
Parameter
Port5 Assign Port6 Assign Port7 Assign Port8 Assign
Setting range The setting range is the same as for the GPI-In Port1/2 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Setting
Parameter
GPI-Out Enable AUX Tly Sel
Setting range
On, Off AUX1, AUX2,
AUX3, AUX4
Default value
On AUX1
GPI-Out
Port1/5
Parameter
Port1 Assign Port2 Assign Port3 Assign Port4 Assign
Setting range
No Assign, AUTO, CUT, KEY1 ON, KEY2 ON, KEY3 ON, DSK1 ON,
DSK2 ON, FTB ON, BKGD AUTO, BKGD CUT, KEY1 AUTO, KEY2
AUTO, KEY3 AUTO, KEY1 CUT, KEY2 CUT, KEY3 CUT, Red Tly 1
to
13, GRN Tly 1
to
13, AUX Tly 1
to
13, Event MEM
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Port2/5
Parameter
Port5 Assign Port6 Assign Port7 Assign Port8 Assign
Setting range The setting range is the same as for the GPI-Out Port1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Port3/5
Parameter
Port9 Assign Port10 Assign Port11 Assign Port12 Assign
Setting range The setting range is the same as for the GPI-Out Port1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Port4/5
Parameter
Port13 Assign Port14 Assign Port15 Assign Port16 Assign
Setting range The setting range is the same as for the GPI-Out Port1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Port5/5 Parameter Port17 Assign Port18 Assign Port19 Assign
Setting range The setting range is the same as for the GPI-Out Port1/5
sub menu.
Default value
No Assign No Assign No Assign
System Menu
Parameter
Lock
Setting range On, Off
Default value
Off
Key Source
Signal
Coupling1
Parameter
Fill/Source
Setting range
Fill To Source,
Source To Fill
Default value
Fill To Source
Key Source
Signal
Coupling2
Parameter
IN1 IN2 SDI IN3 SDI IN4
Setting range
IN1, IN2, SDI IN3, SDI IN4, SDI IN5, SDI IN6, SDI IN7, SDI IN8, IN-
A1, IN-A2, IN-A3, IN-A4, IN-B1, IN-B2, IN-B3, IN-B4, Black, CBGD 1,
CBGD 2, CBAR, Still 1V, Still 1K, Still 2V, Still 2K, Clip 1V, Clip 1K,
Clip 2V, Clip 2K
Default value
IN1 IN2 SDI IN3 SDI IN4
Key Source
Signal
Coupling3
Parameter
SDI IN5 SDI IN6 SDI IN7 SDI IN8
Setting range The setting range is the same as for the Key Source Signal Coupling2 sub
menu.
Default value
SDI IN5 SDI IN6 SDI IN7 SDI IN8
Setting menu table