Panasonic AV-UHS500 Operating Instructions Manual Download Page 114

Page: 114 / 188

114

Input/output signal settings

Setting the split frame and characters

Set the frame, character brightness and background of the
split screens to be displayed on the multi view display.

Press the

XPT

button to light its indicator, and display

the Multi View Display menu.

Use [F1] to display the MV Frame sub menu.

Use [F2] to set the split frame brightness and split frame
display using the Frame item.

LUM0%,
LUM25%,
LUM50%,
LUM75%,
LUM100%

Select one of these settings for the
brightness of the split frame (gray scale).

Off

The split frame is not displayed.

Use [F3] to set the character brightness and character
display using the Character item.

LUM0%,
LUM25%,
LUM50%,
LUM75%,
LUM100%

Select one of these character (gray scale)
brightness settings.

Off

The characters are not displayed.
Neither is the character background shown.

Use [F4] to set whether the character background
(half-tone) is to be displayed using the Label item.

The character background is displayed.

Off

The character background is not displayed.

This is enabled when Fit mode is on.

Setting the tally displays

Set the tally displays to be superimposed onto the split frame
of the multi view display.
You can set 4 tally groups on this unit, and you can set
materials for each of the groups.
Tally groups 1 and 2 can be displayed on the multi view
display.

Press the

CONF

SYS

button to light its indicator, and display

the System menu.

Use [F1] to display the Tally MV Color sub menu.

Use [F2] to [F5] to set the display color for Group1 to 4.

Group1

Fixed to Red.

Group2 to
Group4

Select one from Red, Green, Yellow, or
Orange.

Use [F1] to display the Tally Target sub menu.

Use [F2] to [F5] to select the material to allocate to
Group1 to 4.

PGM

Program video signal

PVW

Preview video signal

CLN

Clean signal

ME PGM

ME program video signal

KeyOut

Key output signal

AUX1

AUX1 bus output signal

AUX2

AUX2 bus output signal

AUX3

AUX3 bus output signal

AUX4

AUX4 bus output signal

Press the

XPT

button to light its indicator, and display

the Multi View Display menu.

Use [F1] to display the Tally Group 1 / 2 sub menu.

Groups 1 and 2 set in

above can be set to

display on the multi view display.

Summary of Contents for AV-UHS500





























































































































































































Search results

Summary of Contents for AV-UHS500

Reviews:

Related manuals for AV-UHS500

Brands by name

Popular brands

Panasonic AV-UHS500, Operating Instructions Manual

Search results

Summary of Contents for AV-UHS500

Reviews:

Related manuals for AV-UHS500

Brands by name

Popular brands