Panasonic AV-UHS500 Operating Instructions Manual Download Page 116

Page: 116 / 188

116

Input/output signal settings

Setting the input signal marks

The status of the input signals can be displayed in front of the
material names displayed on the split screens.

“F” mark:
This appears when the input signals are frozen.
“ ! ” mark:
This appears when no signals are input or when signals

with different formats are input.

When the “F” mark is displayed, the “!” mark is not
displayed.

On the Display sub menu, use [F3] to set the input
signal status display using the Input Status item.

The input signal status is displayed.

Off

The input signal status is not displayed.

Setting the markers

Safety markers can be displayed for the multi view materials.

On the Display sub menu, use [F4] to set the marker
display using the Marker item.

4:3

The markers are displayed using the 4:3
aspect ratio.

16:9

The markers are displayed using the 16:9
aspect ratio.

Off

The markers are not displayed.

Use [F5] to set the size of the markers using the Marker
Size item.

Summary of Contents for AV-UHS500





























































































































































































Search results

Summary of Contents for AV-UHS500

Reviews:

Related manuals for AV-UHS500

Brands by name

Popular brands

Panasonic AV-UHS500, Operating Instructions Manual

Search results

Summary of Contents for AV-UHS500

Reviews:

Related manuals for AV-UHS500

Brands by name

Popular brands