126
System settings
Initialization
Initializing setting data
Initialization returns the set data to the factory shipment
status.
When settings data is initialized, video memory that has been
saved to flash memory is lost.
<Items and data which are not initialized>
p
The items of the System menu listed below:
Network1, Network2, Network3, Date, Time
1
Press the
CONF
SYS
button to light its indicator and display
the System menu.
2
Use [F1] to display the Initial sub menu.
3
Press [F2] to proceed with the initializing.
p
Once initialization has been completed the power of the
unit shuts off and turns back on again automatically.
Initializing fader
The range for executing a transition can be initialized by
operating the fader lever.
Initialization should be performed when transitions are not
completed to the end even when the fader lever has been
moved as far as it will go.
1
Press [F3] in the Initial sub menu to perform
initialization.
2
When initializing, use [F1] to select “Yes” and press the
[F1].
When not initializing, use [F5] to select “No” and press
the [F5].
