Panasonic AFPX-C30R User Manual Download Page 183

Page: 183 / 544

Setting of unit numbers

By default, the unit number for the communication port is set to 1 in the system registers.

In a PC(PLC) link that connects multiple PLCs on the same transmission line, the unit number must be

set in order to identify the different PLCs.

The unit number is specified either by using

the SYS1 instruction

the system register

Note1) The priority order for unit number settings is as follows:

1. SYS1 instruction

2. System registers

Note2) Unit numbers should be set sequentially and consecutively, starting from 1, with no breaks

between them. If there is a missing unit number, the transmission time will be longer.

Note3) If fewer than 16 units are linked, the transmission time can be shortened by setting the largest

unit number in system register no. 47.

Unit numbers are the numbers to identify the different PLCs on the same network. The same number

must not be used for more than one PLC on the same network.

Note:

When using the PC(PLC) link with the RS232C/RS422, the number of units is 2.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands