Panasonic AFPX-C30R User Manual Download Page 234

Page: 234 / 544

- Setting of FP-X
1) FP-X System register setting

No. 412: Computer link mode

2) Setting of AFPX-COM5

Item

Setting value

Communication protocol

TCP

Action mode

Server mode

Communication mode

Computer link

Source port No.

9094

Time out

UDP/IP can be used for the communication method.

In that case, change the communication method of the FP2 ET-LAN unit to UDP/IP.

Set the communication protocol of the AFP-COM5 to UDP, and set the send type to UNICAST.

Note:

For MEWTOCOL master function of the FP2 ET-LAN unit, MEWTOCOL-COM is not available. For

communicating with the FP-X by the computer link, transmit the MEWTOCOL-COM data format using

the transparent communication on the FP2 ET-LAN unit. In this case, an exclusive header is not required

for the ET-LAN unit.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands