Panasonic AFPX-C30R User Manual Download Page 108

Page: 108 / 544

6.3 USB Port

6.3.1 Functions of USB Port

With the USB port, the FP-X offers one communication mode as below.

Computer link

•

Computer link is used for communication with a computer connected to the PLC. Instructions

(command messages) are transmitted to the PLC, and the PLC responds (sends response messages)

based on the instructions received.

•

A proprietary MEWNET protocol called MEWTOCOL-COM is used to exchange data between the

computer and the PLC. There are two different communication methods, 1:1 and 1:N communication. A

1:N network is called a C-NET. The maximum of 99 FP-X units can be connected with one personal

computer.

•

The PLC answers automatically to the commands received from the computer, so no program is

necessary on the PLC side in order to carry out communication.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands