Panasonic AFPX-C30R User Manual Download Page 212

Page: 212 / 544

Setting Ethernet communication environment of Communication cassette AFPX-COM5

The Configurator WD is used to set Ethernet communication environment of the AFPX-COM5.

Start the Configurator WD.

Search the AFPX-COM5.

Select the AFPX-COM5 from the search result, and set an IP address to connect with a computer.

After that, search again. Select the AFPX-COM5, and select [Edit]

→

[Communication Setting] in the

menu, or right-click to select [Communication Setting].

Dialog box of communication setting

Note:

If the TCP is selected for the communication protocol, up to three connections are established using the

computer link (Ethernet), however, when using the programming tool FPWIN GR for connection (using

registration monitor command, multi-frame), more than two connections cannot be established. Also, If

the UDP is selected for the communication protocol, the UDP communication cannot be used as the

programming tool FPWIN GR does not support it, although no restriction on connections.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands