Panasonic AFPX-C30R User Manual Download Page 180

Page: 180 / 544

7.5 Communication Function 3: PC(PLC) Link

7.5.1 PC(PLC) Link

Overview

•

The PLC link is an economic way of linking PLCs of the FP-X, FP

and FP2-MCU, using a twisted-pair

cable.

•

Data is shared between the PLCs using link relays (L) and link registers (LD).

•

The statuses of the link relays and link registers of one PLC are automatically fed back to the other

PLCs on the same network.

•

PC(PLC) link is not the default setting. Therefore, the setting of system register “COM1 Port setting”

communication mode no. 412 must be changed to “PC Link” in order to use this function.

•

Unit numbers and link areas are allocated using the system registers.

•

It is available with the COM1 port only.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands