Panasonic AFPX-C30R User Manual Download Page 124

Page: 124 / 544

6.3.10 Restrictions on USB Communication

There are restrictions on the USB communication.

•

A personal computer having the USB and with the OS supporting the USB

(Windows



98 Second Edition/ Windows



Me/ Windows



2000/ Windows



XP) to connect the FP-

X using the USB.

•

The FP-X connected to the USB is recognized by the PC as that is connected through the COM

port.

•

The COM port No. of the COM port allocated for the USB is fixed unless you change the number.

•

The baud rate when using the USB is 115200 bps.

•

The USB port is allocated to the COM2 port, and the functions of the communication cassette

are restricted as below.
The USB port is available in the default setting (It is the same when the system registers are
initialized).

When USB port is not used

When USB port is used

AFPX-COM1

5-wire 1-channel RS232C

3-wire 1-channel RS232C

(RS and CS control is not available.)

AFPX-COM2

3-wire 2-channel RS232C

3-wire 1-channel RS232C

(The 2nd channel cannot be used.)

AFPX-COM3

No restrictions, 1-channel RS485/RS422

AFPX-COM4

1-channel RS485

1-channel RS232C

1-channel RS485

(RS232C cannot be used.)

AFPX-COM5

Ethernet

1-channel RS232C

Ethernet

(RS232C cannot be used.)

AFPX-COM6

2-channel RS485

1-channel RS485

Note) There is no USB port for the C14 control unit.

•

When multiple FP-X are connected to one PC with the USB, it cannot communicates with them

simultaneously. The PC can communication with only the FP-X that was connected first, and
other FP-X cannot communicate.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands