Panasonic AFPX-C30R User Manual Download Page 391

Page: 391 / 544

12.2.4 Handling of Master Memories Created with Different Models

PLC that created master memory

Ry type

Tr type

C14

C30

C60

C14

C30

C60

Installed
PLC

Ry type

C14

E25

C30

E25

C60

E25

Tr type

C14

E25

C30

E25

C60

E25

A: Can be installed and operated.

: Can be installed depending on the program capacity.

E25: Master memory model unmatch error

Note1) If the E25 occurs, the mode will not be the RUN.

Also, the transfer operation from the master memory to the internal memory of the controller will

not be executed.

The transfer operation from the internal memory of the controller to the master memory can be

executed even if the E25 occurs.

Note2) If the version of the Ry type is older than Ver2.0, the E26 (User’s ROM error) is detected not the

E25.

Note3) Use the tool software to execute the program conversion between different models.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands