Panasonic AFPX-C30R User Manual Download Page 222

Page: 222 / 544

7.7.10 Communication Function 2: General-purpose Serial Communication
(Ethernet)

The supplement is described below to conduct Ethernet communication by the general-purpose
serial communication.

Reference:

<7.4 Communication Function 2: General-purpose Serial Communication>

Overview

•

Data can be sent and received between the FP-X and an external device using Ethernet.

•

Data is read from and written to an external device connected to Ethernet by means of FP-X data

registers, and the programs are required for the FP-X.

Outline of operation

•

Connection with an external device is established using the general-purpose serial communication

(Ethernet). Number of connection is one.

•

Select either the client mode or server mode.

•

In case of the client mode, connection is established by the AFPX-COM5 for a predetermined IP

address after turning on the power supply of the FP-X.

•

There are “Send data” and “Receive data” for the data transfer with an external device.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands