Panasonic AFPX-C30R User Manual Download Page 17

Page: 17 / 544

Positioning control supported through high-speed counter and pulse output

With the FP-X Tr type, a high-speed counter function can be used by using the CPU I/O.

With the FP-X Ry type, a high-speed counter and pulse output functions can be used by using the pulse

I/O cassette. The pulse output function supports frequencies of up to 100kHz, enabling positioning

control using a stepping motor or servo motor.

Note) The pulse I/O cassette cannot be used for the FP-X Tr type.

Measurement using high-speed counter supported

Increment input mode, decrement input mode, 2-phase input mode, individual input mode, and direction

discrimination mode are supported.

Note) Differs depending on combinations.

Positioning control based on pulse output supported

Pulse/direction and clockwise/counter –clockwise output are supported.

Heater control based on PWM output function supported

The pulse output at any duty ratio can be picked up with special instruction.

Analog potentiometer (volume dial)

An analog potentiometer (volume dial) is provided as a standard feature. This can be used in

applications such as analog timers, without using the programming tools.

Realtime clock function can be added

Optional FP-X master memory cassette (AFPX-MRTC) and backup battery enables the realtime clock

function.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C30R

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands

Panasonic AFPX-C30R, User Manual

Search results

Summary of Contents for AFPX-C30R

Reviews:

Related manuals for AFPX-C30R

Brands by name

Popular brands