Panametrics HydroProII, User Manual

Page: 67 / 104

HygroPro
II
User's Manual 55
Appendix A. HygroPro
II
HART
®
Field Device Specification
Command-Specific Response Codes
A.9.10 Command 149 (0x95): Read Temperature Constant
Reads the temperature constant used instead of the live measurement.
First byte is an enumeration: 0 = temperature constant active, 1 = live measurement instead of constant
Request Data Bytes
Response Data Bytes
Command-Specific Response Codes
A.9.11 Command 150 (0x96): Set Dew Point Offset
This command will set the Dew Point Offset adjustment.
Request Data Bytes
Code Class Description
0 Success No Command-Specific Errors
1-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7 Error In Write Protect Mode
8-15 Undefined
16 Error Access Restricted
8-127 Undefined
Byte Format Description
None
Byte Format Description
0 Unsigned-8 0 = use constant 1 = live
1 ~ 4 Float Temperature constant used instead of live measurement.
Code Class Description
0 Success No Command-Specific Errors
1-127 Undefined
Byte Format Description
0 Float Dew Point offset adjustment.