Panametrics HydroProII, User Manual

Page: 41 / 104

HygroPro
II
User's Manual 29
Chapter 2. Operation
2.3.5 About Display/Probe
The HygroPro
II
has two independent components – the display and the HygroRTE probe – each with its dedicated
electronics and firmware. As described in Appendix B, the display and/or probe firmware can be independently
updated in the field via the RS-485 port.
To review the Display and/or Probe configurations,
choose the About option on the Main Menu and
press Enter to access the About Menu screen.
Use the Up and Down arrow keys to select About
Display and press Enter. The next screen shown on
the left shows the Serial no., firmware and hardware
versions and the manufacturing date of the display.
Press Escape to return to the About menu.
Use the Up and Down arrow keys to select About
Probe and press Enter. The next screen shown on
the left shows the Serial no., firmware and hardware
versions and the last Calibration date of the probe.
Press Escape to return to the About menu.