Panametrics CGA 351, User Manual, Page: 67 / 119

CGA 351 User’s Manual 61
Chapter 4.
4.1.13.2 Setting the Security Levels
To set up the menu security levels, enter the User Program as described on page 27 and proceed as follows:
Note: The
[User]
and
[Setup]
options also appear in the above list box.
Because these menus are intended for factory use only, specific programming instructions are not presented here.
However, the general purposes of these menus are as follows:
•
Lock Menus: this option permits the setting of the security level for any of the individual submenus.
• Lock All: this option institutes password protection for all submenus simultaneously.
• Versions: this option displays the software versions for each of the system components.
After responding to any of the above options, the meter now automatically returns to the “Opt” prompt. This
completes the setting of the option slots and the security levels. Either press [ESC] until you exit the User Program or
proceed to the appropriate section of this chapter to continue programming the meter.
Table 111:
Cfg Cal
Opt
Disp Use the [

] and [

] keys to
select [Opt] and press
[ENTER] .
POWER ESC ENTER
Table 112:
Cfg Cal
Opt
Disp Use the [

] and [

] keys to
select the desired option and
press [ENTER] .
Lock Menus
Lock All
Versions
POWER ESC ENTER