Panametrics CGA 351, User Manual, Page: 57 / 119

CGA 351 User’s Manual 51
Chapter 4.
4.1.9.3 Setting the Span Setpoint
Enter the analog output setup menu, as described on page 47, and proceed as follows:
Note: The
[Test], [Zero Trim]
and
[Span Trim]
options are also available in the above list box.
At the next prompt, enter the desired span setpoint.
The meter now automatically returns to the “Analog Output” prompt. Either press [ESC] until you exit the
User
Program or proceed to the appropriate section to continue setting up the analog output.
Table 82:
User Aout Use the [

] and [

] keys to
select [Span Setpoint] , and
press [ENTER] .
Zero Setpoint
Span Setpoint
Test
POWER ESC ENTER
Table 83:
User Aout Span-Set Use [

] and [

] to position
the cursor under the desired
character. Then, use [

] and
[

] to increment the value.
Press [ENTER] when done.
mV
0000.00
p
POWER ESC ENTER