Panametrics CGA 351, User Manual, Page: 51 / 119

CGA 351 User’s Manual 45
Chapter 4.
Selecting the Units
To select the units to be used, proceed as follows:
Note: Entry of the zero and span points for all ranges will be made in the units selected above. Internally, the CGA
351 will automatically convert the data into the non-selected units.
Entering the Zero and Span Points
The above step will be repeated as many times as necessary to complete the table for the total number of ranges
selected on
page 44.
Table 69:
A . . Auto_Range_Units Use the [

] and [

] keys to
select the desired units table
and press [ENTER] .
PCT_Table
PPM_Table
POWER ESC ENTER
Table 70:
Num_of_Auto_Ranges Use the [

] and [

] keys to
position the cursor. Then, use
the [

] and [

] keys to
increment the character to
the desired value. When done,
press [ENTER] .
Zero_Pct. Span_Pct.
xx.xxxxx xxx.xxxx

1..4
POWER ESC ENTER