Panametrics CGA 351, User Manual, Page: 42 / 119

Chapter 4.
36 CGA 351 User’s Manual
4.1.5.2 Entering the Sensor Temperature
Enter the temperature control menu, as described on page 34, and proceed as follows:
Note: The [Select Gas Type], [Prop Band], [Int Time]
,
[Max.Duty Cycle] and [Default] options are also available in the
above list box.
At the next prompt, enter the desired value for the air offset.
The meter now automatically returns to the “Temp. Control” prompt. Either press
[ESC]
until you exit the User Program
or proceed to the appropriate section to continue setting up the temperature control.
Table 44:
Temp-Cntrl Use the [

] and [

] keys to
select [Sensor Temp] and press
[ENTER] .
Setpoint
Sensor Temp
Air Offset
POWER ESC ENTER
Table 45:
Temp-C . . Sensor-Temp Using the [

] and [

] keys,
position the cursor under the
desired character. Then, use
the [

] and [

] keys to
increment the value. When
done, press [ENTER] .
Sensor Temp
000
p
POWER ESC ENTER
Table 46:
Tem..Unit-Measuring This message indicates that
changes in this menu will alter
the live data output. To
accept the new value, use the
[

] and [

] keys to select
[Yes] and press [ENTER] .
Unit measuring
Accept changes?
Yes
No Cancel
POWER ESC ENTER