Panametrics CGA 351, User Manual, Page: 44 / 119

Chapter 4.
38 CGA 351 User’s Manual
4.1.5.4 Selecting the Gas Type
CAUTION!
Improper temperature controls settings can seriously degrade the performance of the instrument.
Never change these settings without specific instructions from the factory.
Enter the temperature control menu, as described on page 34, and proceed as follows:
Note: The
[Setpoint], [Sensor Temp], [Int Time]
,
[Max.Duty Cycle]
and
[Default]
options are also available in the above
list box.
Note: The
[Natural Gas], [Coke Oven Gas], [Methane]
,
and
[Other]
options are also available in the above list box.
The meter now automatically returns to the “Temp. Control” prompt. Either press
[ESC]
until you exit the User Program
or proceed to the appropriate section to continue setting up the temperature control.
Table 50:
Temp-Cntrl Use the [

] and [

] keys to
select [Select Gas Type] and
press [ENTER] .
Air Offset
Select Gas Type
Prop Band
POWER ESC ENTER
Table 51:
Te . . Select-Gas-Type Use the [

] and [

] keys to
select the type of gas. When
done, press [ENTER] .
Coal
Oil
Propane - Butane
POWER ESC ENTER
Table 52:
Tem . . Enter_HC_Ratio Using the [

] and [

] keys,
position the cursor under the
desired character. Then, use
the [

] and [

] keys to
increment the value. When
done, press [ENTER] .
Enter_HC_Ratio
0.0000
p
POWER ESC ENTER