Panametrics CGA 351, User Manual, Page: 29 / 119

CGA 351 User’s Manual 23
Chapter 3.
Switching Display Windows (cont.)
When configuring the digital display options, the following two factors must be considered:
•
Only the
digital display and the fault alarm options can be simultaneously assigned to more than one
parameter. This is because they are virtual devices that are stored in memory.
• The analog output, alarm-1, alarm-2, alarm-3 and alarm-4 options can be assigned to only one parameter at any
given time. This is because they are linked to a specific physical device.
One must be careful about making changes in the User Program, while data is being displayed. If the currently
selected display input is accidentally deselected, the screen reverts to the following:
Although the meter is still collecting data, the digital display does not know which information to show. Simply
re-select the appropriate input parameter, through the [Disp] menu option, to restore the digital display.
Table 18:
Cfg Cal Opt Disp A list of the available windows
is shown. Use the [

] and [

]
keys to select the desired
window and press [ENTER] .
1: Oxygen pcnt
1: Temperature DegF
1: Oxygen ppm
POWER ESC ENTER
Table 19:
1 Oxygen After pressing [ENTER] at the
previous prompt, press [ESC]
and the alternate display
appears.
3.27 pcnt
POWER ESC ENTER
Table 20:
x_Unassigned
POWER ESC ENTER