Panametrics CGA 351, User Manual, Page: 24 / 119

Chapter 3.
18 CGA 351 User’s Manual
3.1.5.2 Configuration Options
Note: The
[CJC Temp]
and
[Duty Cycle]
options are also available in the above list box.
If either of the Temperature inputs is selected for display, °C and °F are available as the unit types. For the Sensor and
Duty Cycle inputs, mV and pcnt, respectively, are the only available unit types.
Table 5:
Cfg Cal Opt
Disp
Upon entering the User
Program, the [Cfg] option is
already selected. Simply press
[ENTER] . (Notice that the
[Disp] option is grayed out at
this time.
POWER ESC ENTER
Table 6:
Cfg
Cal Opt
Disp
To proceed with the [1: Cfg]
option, press [ENTER] . To
abort the operation, press
[ESC] .
1: Cfg
POWER ESC ENTER
Table 7:
From 1: Cfg A list of the available display
inputs is shown. Use the [

]
and [

] keys to select the
desired input and press
[ENTER] .
Oxygen has been
selected as an example.
Oxygen
Temperature
Sensor
POWER ESC ENTER
Table 8:
From 1: Cfg Oxygen A list of the available unit
types is shown. Use the [

]
and [

] keys to select the
desired units (
parts per
million or percent) and press
[ENTER] .
ppm
pcnt
AF
POWER ESC ENTER