palmOne Treo 650, Using Instruction

Page: 49 / 208

Managing active calls :: 47
Ending a call
Do one of the following:
• Press Power/End. .
• Select Hang Up.
• Press the headset button (if the headset is attached).
Switches from a headset with Bluetooth wireless technology to the
built-in earpiece. This button replaces the Spkr-phone button when a
headset with Bluetooth wireless technology is attached.
Places the current call on hold.
Lets you place another call while the first call is on hold. This button
replaces the Hold button when a call is on hold.
Opens the Dial Pad so you can manually dial additional numbers.
Dials any extra digits (such as a password or extension) that you
assigned to a Speed Dial favorite button. This button replaces the Dial
Pad button during outbound calls to numbers that include predefined
extra digits. See “Defining favorite buttons” on page 53 for information
on creating a Speed Dial favorite button.
Mutes the Treo microphone so that you cannot be heard.
When a call lasts longer
than one minute, the
screen turns off. Press any
key except Power/End to
wake up the screen, and
then press Power/End to
hang up the call. Be
careful not to press
Power/End to wake up the
screen because this will
accidentally end the call.
CrowAce.book Page 47 Tuesday, November 9, 2004 10:02 AM