manualshive.com logo in svg

Palm P80880US - Tungsten E - OS 5.2.1 126 MHz, Handbook

Share
Download
Palm P80880US - Tungsten E - OS 5.2.1 126 MHz Handbook Download Page 191

Getting, sending, and managing e-mail

181

Among the types of attachments you can receive are the following handheld 
application files:

■

Contacts entries

■

Calendar appointments

■

Tasks list items

■

Text memos

You can also save downloaded files to an expansion card. See 

“Saving attachments 

to an expansion card”

 later in this chapter for information.

NOTE

The maximum message size that you can retrieve is 60KB for the body text 

and approximately 5MB of total data for any attachments. If the attachment is too 
large, it cannot be downloaded to the handheld. Because downloading large 
messages can consume handheld resources, the VersaMail application displays the 
size of and asks if you want to continue downloading any message that exceeds your 
maximum message size, up to a total size of 5MB.

To download an attachment:

1.

In the Inbox, tap the message with the attachment. 

A paper clip icon appears on the message’s icon if the message has an 
attachment that has been downloaded.

If you choose to get messages by subject only, you must tap More for each 
downloaded message in order to view the body of the e-mail message plus any 
attachments, up to the maximum message size. If the downloaded message 
(either body text alone or body text plus any attachments) exceeds your 
maximum message size, you see a message showing that the message and/or 
attachments were too large and asking if you would like to continue 
downloading them. 

Paper clip icon 
indicates 
downloaded 
attachment

Summary of Contents for P80880US - Tungsten E - OS 5.2.1 126 MHz































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands