16
51-3000
OPERATION
Before each use
Preform daily maintenance as indicted in
Maintenance: Schedule.
Run the prime mover and sweeper at a slow idle.
Check for loose hardware or other problems and
make corrections, if necessary, before using the
sweeper.
WARNING! AVOID SERIOUS INJURY.
Check
for objects that could harm the
operator or others if thrown by the
sweeper. Remove items before
sweeping.
Observe wind direction. Sweeping with the wind
makes sweeping more effective and helps keep
debris off the operator.
Directing Debris
Direct debris by angling the brush head in that
direction.
The terms
swing
and
angle
are used
interchangeably.
Manual Angle Kit with Tube Links
1. Remove the lock pin from links.
2. Position the brush head at the desired angle,
aligning holes in the inner and outer link.
3. Insert and close the lock pin.
Manual Angle Kit with T-Pin
1. Pull up on the T-pin.
2. Position the brush head at the desired angle.
3. Allow the pin to spring back into place.
Optional Hydraulic Angle Kit
1. Start the prime mover.
2. Position the brush head at the desired angle by
using the valve control for swing function.
Sweeping
To sweep:
1. Manual Angle Kit Only - Swing the brush head
assembly the direction that you want to direct
debris.
2. Start the prime mover at idle.
3. Engage the PTO.
4. Hydraulic Angle Kit Only - Swing the brush head
assembly the direction that you want to direct
debris.
5. Lower the brush to the ground.
6. Increase prime mover engine rpm to sweeping
speed.
NOTICE!
AVOID DAMAGE TO THE PRIME
MOVER PTO.
Do not run the engine
at speeds which make the PTO
run faster than the recommended
speed marked on the prime mover’s
tachometer.
7. Travel forward at 5mph (8kph) or less.
At the end of a run: slow engine and travel
speeds, disengage the brush, raise the brush
head assembly and then make the turn.
NOTICE!
AVOID SWEEPER DAMAGE.
When
approaching obstacles, like utility
poles or fire hydrants, slow engine
and travels to avoid hitting these
hazards.
Summary of Contents for Sweepster CTM4800
