paladin Sweepster CTM4800, Operator And Parts Manual

Page: 7 / 62

7
51-3000
SAFETY SIGNS & LABELS
SAFETY SIGNS & LABELS
There are several specific signs on this sweeper.
The exact location of the hazards and description of
the hazards are reviewed.
Placement or replacement of Safety Signs
1. Clean the area of application with nonflammable
solvent, and then wash the same area with soap
and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign,
exposing the adhesive surface.
4. Apply the safety sign to the position shown in
the diagram above and smooth out any bubbles.
Instructions
1. Keep all safety signs clean and legible.
2. Replace all missing, illegible, or damaged safety
signs.
3. Replacement parts, for parts with safety signs
attached, must also have safety signs attached.
4. Safety signs are available, free of charge, from
your dealer.
Item Part Qty Description
1. 50-0147 1 Decal, Frequency of Lube,
Weasler
2. 50-0115 2 Decal, Danger, Rotary
Driveline
3. 50-0236 1 Decal, Gearbox, Hubcity,
Check Oil
4. 50-0721 2 Decal, Warning, Crush point
5. 50-0722 1 Decal, Warning, Misuse
Hazard
6. 50-0726 2 Decal, Warning, Flying
Objects & Entanglement
7. 41043 1 Decal, Warning, Hazardous
dust
1. 50-0147
5. 50-0722
6. 50-0726
4. 50-0721
3. 50-0236
2. 50-0115
2
4
4
5
6
6
2
1
7
3
Serial Tag Location
7. 41043