21
51-3000
MAINTENANCE
figure 4
figure 5
9. Place the retainer halves on the brush and
reinstall the screws.
10. Position the brush in front of the brush hood.
11. Reinstall the drive chain on the core sprocket.
12. Slide the brush into the left-hand side of the
brush frame. Reinstall the hardware but do not
tighten completely.
13. Slide the right-hand side of the brush into the
brush frame. Reinstall the rear hardware but do
not tighten.
14. Replace the shield and reinstall the front bolt.
15. Tighten the hardware on the left-hand side.
16. Pull the drive chain tight; then, tighten the
hardware on the right-hand side.
Worn Section Standard
Reference
Information
Section OD,
New
Ring ID
Section
OD, Worn
Exposed
Bristle, Worn
Bristle
Length
Exposed
Bristle, New
24
6.38
17
3.8
8.50
7.5
26
8.00
18
4.0
9.00
8.0
32
10.00
22
5.0
11.00
10.0
36
10.00
24
6.0
13.00
12.0
36
10.63
25
6.0
12.69
11.4
46
19.38
34
6.0
13.31
12.1
Summary of Contents for Sweepster CTM4800
