72
— Model 6757i CT Series IP Phone User Guide
Line Ke
ys
and Softkey
s
Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific
softkey. You do this by setting the softkey to
empty
. The softkeys are added in
order (from softkey1 to softkey 20) after any hard-coded keys have been added.
If a particular softkey is not defined, it is ignored.
Setting an Empty Key
Use the following procedure to configure an Empty softkey on the 6757i CT
phone.
1.
Click on
Operation->Softkeys and XML
.
or
Click on
Operation->Expansion Module <N>
.
2.
Click on the
Bottom
tab or the
Top
tab.
3.
Select from
"Key 1"
through "
Key 20
" on the bottom tab or select from "
Key
1
" through "
Key 10
" on the top tab.
4.
In the
Type
field, select
Empty
.
5.
If configuring a softkey on the Bottom Keys, in the state fields, check (
enable
)
or uncheck (
disable
) the states you want to apply to this softkey.
6.
Click
to save your changes.
Packet8 Web Phone UI
