Packet8 Virtual Office 6757i CT User Manual Download

Page: 158 / 173

Model 6757i CT Series IP Phone User Guide

—

153

Model 536EM a

560E

Expansi

n Modu

les

The

Auto-Answer

field is enabled by default. The automatic answering feature

is turned on for the IP phone for answering Intercom calls. To disable this
field, uncheck the box.

The

Microphone Mute

field is enabled by default. The microphone is muted

on the IP phone for Intercom calls made by the originating caller. To disable
this field, uncheck the box.

The

Play Warning Tone

field is enabled by default. If

Auto-Answer

is enabled,

the phone plays a warning tone when it receives in incoming Intercom call. To
disable this field, uncheck the box.

The

Allow Barge In

field is disabled by default. If

Allow Barge In

is enabled,

the phone puts an active call on hold and answers the incoming Intercom call.
To enable the field, check the box.

Click

to save your settings.

Model 536EM and 560EM Expansion Modules

The 6757i CT IP Phone offers optional 536EM and 560EM Expansion Modules
that attach to the right side of the phone to provide additional softkeys.

Model 536EM

The 536EM provides 18 softkeys in each column (totaling 36 keys) on the
keypad. Each key provides an LED for indicating call status. The 536EM
provides a paper label for convenient key labeling.

Note:

If the Auto-Answer field is not checked (disabled), the phone rejects

the incoming Intercom call and sends a busy signal to the caller.

Goodbye

Options

Hold

Redial

Line 4

Line 2

Line 1

Speaker/
Heading

Mute

Line 3

Summary of Contents for Virtual Office 6757i CT














































































































































































Search results

Summary of Contents for Virtual Office 6757i CT

Reviews:

Related manuals for Virtual Office 6757i CT

Brands by name

Popular brands

Packet8 Virtual Office 6757i CT, User Manual

Search results

Summary of Contents for Virtual Office 6757i CT

Reviews:

Related manuals for Virtual Office 6757i CT

Brands by name

Popular brands