Model 6757i CT Series IP Phone User Guide
—
121
Accessing
Op
tions on the
Handset
• If no line keys are programmed for the feature key, the handset is restricted
to Intercom calls only.
• If all 12 programmable functions have been programmed to
None
, the user
is presented with a
List empty
message when the feature key is pressed.
• For security reasons, the user has 180 seconds (3 minutes) to complete the
programming. Otherwise, the phone displays the following error:
** Error **: Session expired, Please reload page
.
• For security reasons, the user must submit the page from the same browser
that was used to load the page. If the user tries to submit the page from any
other IP address, the following error displays:
** Error ** Session invalid. Different Client IP Addresses. — Please
reload page
.
Programming Feature Keys
You can program up to 15 feature keys on the 6757i CT IP phone using the
Packet8 Web Phone UI. Use the following procedure to program the feature
keys on your 6757i CT Base Station and all paired handsets.
1.
Open your web browser and enter the phone’s IP address or host name into
the address field.
2.
At the prompt, enter your username and password and click
.
3.
Click on
Operation->Handset Keys
.
Packet8 Web Phone UI
Note:
For a user, the default user name is “
user
” and the password field is
left blank
List empty
Use web page to
configure
