Model 6757i CT Series IP Phone User Guide
—
131
Making Cal
ls from Cordless Handset
Making Calls from Cordless Handset
Pre-dialling a Number
1.
Press the
v
key to obtain dial tone and use the Keypad to dial the number.
You can also make a call by pre-dialling a number. Pre-dialling lets you view a
number before you dial.
2.
If the number is correct, press the
v
key to dial the number.
3.
If the number is incorrect, use the
Â
key or press down on the volume key to
erase digits from right to left. Calls can also be made directly from the
Directory.
Using a Headset
The 6757i CT cordless handset accepts headsets through the 2.5 mm audio
jack on the bottom of the phone. Contact your telephone equipment retailer or
distributor to purchase a compatible headset, or go to
www.Packet8.net/store
.
Customers should read and observe all safety recommendations contained in
headset operating guides when using any headset.
Receiving Calls
• When a call is ringing at your extension, the handset displays the
Inbound
Call
screen.
• Press the
v
key to answer an incoming call or lift the handset out of the
charging cradle.
Call Privacy
In the 6757i CT multi-handset system, it is possible to connect several cordless
handsets together with each other or with the base as extensions to a call. This is
just like an analog system with extension phones going off hook to join a call in
progress. However, because this system is actually intended for use in an
enterprise environment, some method of call privacy is required.
All calls, base or handset, begin in the private mode.
In this mode, no
extensions are allowed to join that handset or base call. A user interface provides
the ability to toggle between the
Private
and
Public
modes. See the next section
for information about using the
Public
and
Private
keys.
Handset UI
Handset UI
