![background image](http://html1.mh-extra.com/html/oval/el2310-0de-series/el2310-0de-series_instructions-manual_1662137031.webp)
E-026-3-E
3
3.7 Menu: Diag / Service (check / adjustment)
"Diag/Service" can be used to diagnose the flowmeter transmitter, perform loop tests on each output,
adjust output values, calibrate the sensitivity of flow rate sensor, and reset cumulative totals.
Close all "Setup (S)" windows to enable checking and adjustment functions.
Also note that other than "Loop test", the "Diag/Service (T)" window cannot be displayed simultaneously
with multiple windows (other than "Totalizer control").
The actual screen is as shown in Fig. 3-48.
Fig. 3-48
Diag/Service
Loop test
Fix Analog
Fix Pulse
Fix Flow
Calibration
Auto zero
Init AGC
Trim Analog
Totalizer cntrl
Diag/Service Item Tree