![background image](http://html1.mh-extra.com/html/oval/el2310-0de-series/el2310-0de-series_instructions-manual_1662137026.webp)
E-026-3-E
26
Fig. 3-38
Setting item
Detail
Setting range
Pulse 2 mode
Pulse 2 output assignment
0: inversion of pulse 1
1: reverse direction (in case of both of
forward and reverse directions)
0, 1
(3) Click "OK" after the setting is completed. Then the message box (Fig. 3-37) will be displayed.
Click "OK" here to change the settings to the inputted values, and to reflect the changed setting
values in the flowmeter's output. If the flowmeter's output is used to control valves or other such
parts as safety protocol, change the control loop to manual control so that the control loop cannot be
influenced by the flowmeter's output.
3.6.3 Outputs (output setting)
3.6.3.1 Pulse output (pulse output setting)
(1) Click "Setup (S)" from the menu, and then click on "Pulse output" from the drop-down list of
"Outputs".
(2) The following window (Fig. 3-36) will be displayed. Here, set the mode of pulse output.
Fig. 3-36
(4) Click "OK" button. If the setting is changed to the selected setting value, the message box (Fig. 3-38)
will be displayed. Click "OK" button to complete the setting.
(5) After clicking "OK" button, the window will return to the window for inputting the item. Click "Cancel"
button to close the window for inputting the item.
To cancel the setting, click "Cancel" button during (2) to (3).
Fig. 3-37