E-026-3-E
20
(9) The content of the log file when logging interval is set to "5 Seconds" is as shown in Fig. 3-26.
Fig. 3-26
Date
Percent flow
Flow rate
Flow velocity
Gain 3 Gain 4
Gain 2
Gain 1
Reynolds number
(10) If you click the
button on the tool bar or "Chart and Recording" - "Active" from the menu, chart
display and data logging will be terminated.
3.5.3 Write protect (write status display of transmitter)
Whether the parameter of transmitter can be changed or not is displayed.
(1) Click "Process Variables(V)" in the upper part of the screen, and then click on "Write protect". Then,
the following window (Fig. 3-27) will be displayed.
"Write protect" shows whether parameter change of the transmitter is available or not.
Mode
Detail
SW (S1-LCK) setting
Not write protected
Enables changing and setting parameters.
OFF
Write protected
Disables changing and setting parameters.
ON
NOTE: Selecting the above mode is available by changing switches S1-LCK on the CPU board
of the flowmeter transmitter.
(2) To exit this procedure, click "Cancel" button.
Fig. 3-27
