18
19
RU
EN
•
This appliance is not intended for use by persons
(including children) with reduced physical, sen
-
sory or mental capabilities, or lack of experience
and knowledge. They can only use the device
under the supervision of the person responsible
for their safety, or after instruction on the safe
use of the device. Do not allow children to play
with the product.
•
This product is intended only for use in the home.
•
If the power cord is damaged, it must be replaced
by a specialist from the authorized service center
( ASC ) OURSSON AG to avoid danger.
•
Use only the tools, which are included in the
product set.
•
When cleaning the appliance do not use abra
-
sives and organic cleaners (alcohol, gasoline,
etc.). When cleaning the device it is allowed to
use a small amount of neutral detergent.
When using electrical appliances should take the
following precautions:
•
Use the device according to the following instruc
-
tions manual.
•
Install the device on a stable surface.
•
Use only the tools, which are included in the
product set.
•
To protect against risk of electrical shock do
not put the cord in water or other liquid. If
for some reason the water got into the unit,
contact an authorized service center (ASC)
OURSSON AG.
•
For power supply, use a power grid with proper
characteristics.
•
Do not use the device in areas where the air can
contain vapors of flammable substances.
•
Never attempt to open the device by yourself
– it could possibly be the reason of an elec
-
trical shock can lead to product malfunction
and will invalidate the manufacturer’s war
-
ranty. For repair and maintenance, contact
only authorized service centers meant for
repair of products under the trademark
OURSSON.
•
When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
•
In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
•
Be particularly careful and cautious when using
the device near children.
•
Do not touch any hot parts, as this may cause
injury.
•
The power cord is specially made relatively short
in order to avoid the risk of injury.
•
Do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
•
Do not connect this device to a grid which is
overloaded with other appliances: it can lead to
the fact that the device will not function properly.
•
Do not install the device near gas and electric
stoves and ovens.
•
After use, make sure to disconnect the device
from the power grid.
•
Keep the device from bumps, falls, vibration and
other mechanical influences.
•
Make sure to disconnect the device from the
power grid before cleaning or changing acces
-
sories.
•
Do not use the device outdoors.
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the
instructions.
SAFETY INSTRUCTIONS,
Pic. A
RECOMMENDATIONS
•
Please read the instruction manual before using the
device. Keep the manual after reading for further use.
•
All illustrations in this manual are schematic
representations of real objects, which may differ from
the actual images.
PRODUCT SET,
Рiс. В
Full-automatic coffee machine ................................. 1 pc.
Operation manual
.................................................... 1 pc.
Water hardness test paper
...................................... 1 pc.
Coffee powder spoon .............................................. 1 pc.
Milk pipe
.................................................................. 2 pc.
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
ELEMENTS OF DESIGN,
Рiс. C
Bean container cover
Water tank lid
Water tank
Coffee grounds container
Drip tray
Drip tray grid
Powder container cover
Grinding wheel
UTILIZATION,
Рiс. C
Control panel,
Рiс. С-1
Bean container
Coffee spout
Handle
Milk pipe
Milk frother
Hot water spout
Milk and cream spout
Power cord
12
14
13
15
16
- Espresso
- Long Coffee
- Hot water
- Power switch
- Cappuccino
Display
- Coffee Latte
- Hot milk / cream
- Cleaning button
- Rotary button.
Before first use,
wipe the body with a clean dry cloth.
Before assembling or disassembling make sure that, the
device is unplugged.
Operation order:
First-time use
•
As the machine has been tested at factory, there may be
a little coffee powder left over. We promise the machine is
brand new.
•
The coffee machine will start self-testing and cleaning
at the first-time use, this helps the coffee machine to
achieve the best working condition, and this process can
not be skiped.
•
During the cleaning process, some hot water
will outflow from the coffee spout into the drip
tray. Please pay attention to avoid contacting
with the spilling hot water, not to be scalded.
1. Press the power button
2. Displays «
WELCOME
»
3. Displays «
SELF TESTING
»
4. Displays «
HEATING
»
5. Displays «
CLEANING
»
6. Displays «
READY
»
4. Displays «
CLEANING
»
5. Displays «
READY
»
NOTE:
Every time after powering on the coffee machine,
it will automatically complete heating and cleaning of the
spouts.
Power
OFF
1. Press the power button
2. Displays «
CLEANING/RINSE MILK UNIT
»
3. Displays «
GOODBYE
»
NOTE:
Every time before powering off the coffee machine,
it will automatically complete cleaning the spouts.
Testing water hardness
•
If the water hardness setting on the coffee machine does
not match the actual water hardness, it will not give a
good taste of coffee, or even damage the machine.
•
Testing the water hardness order:
•
Take out the water hardness test paper from the
accessory bag.
•
Put the testing part in the water for 5 seconds.
•
Take out the paper from water, and observe the color
according to the picture.
•
Then set the water hardness number according to
the contrast card.
Adjusting the water hardness setting
•
Display “
READY
”
•
Press and hold for 2 seconds, display
«
MAINTENANCE
»
•
Using
choose «
WATER HARDNESS
» option, and
then press
•
By turning the
, you can adjust water hardness
parameters to:
•
Press to confirm, display «
WATER HARDNESS
».
NOTE:
Default water hardness is level 4.
2
2
2
3
4
3
3
5
4
6
5
1
Power ON
1. Press the power button
2. Displays «
WELCOME
»
3. Displays «
HEATING
»
WELCOME
SELF TESTING
HEATING
MAINTENANCE
CLEANING
READY
WELCOME
HEATING
CLEANING
CLEANING
READY
GOODBYE
5 sec
Water hardness test color
Reaction
time 10 sec
mg/L
10 sec