Ottobock | 15
33955, 339551
Attention!
Do not use talcum powder to eliminate noise in the cosmetic foam cover. Talcum powder
reduces the lubrication of the mechanical parts, which may lead to malfunctions and
thus increase the risk of failure. Using this medical product after application of talcum
powder will render all claims null and void.
Notice:
To reduce friction and to eliminate noise, please apply 519L5 Silicone Spray directly on
the contact surfaces of the cosmetic foam cover.
4.5 Maintenance instructions
Attention!
Do not disassemble the knee joint! If you have a problem, please send the knee joint
in for service.
Ottobock recommends readjusting the knee joint‘s settings once the patient has gotten used to
the prosthesis. This period of time varies depending on individual patient characteristics.
Please check the knee joint for wear and proper function once a year and make adjustments,
if necessary. Special attention should be paid to the flexion and extension resistances and ab-
normal noises.
Full flexion and extension must be guaranteed.
Whenever servicing the knee joint, replace the rubber stop.
Note:
As a basic principle, all Ottobock knee joints are subjected to tests involving three million load
cycles. Depending on the amputee‘s activity this corresponds to a service life of three to five years.
We recommend carrying out regular safety checks once a year.
5 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
5.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip-
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
5.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC for medical devices.
This product has been classified as a class I device according to the classification criteria outlined
in Annex IX of the directive. The declaration of conformity was therefore created by the manufac-
turer with sole responsibility according to Annex VII of the directive.
Summary of Contents for 3R95
