otometrics Madsen AccuScreen PRO, User Manual, Page: 80 / 98

80 GN Otometrics A/S
Options AccuScreen PRO User Manual
2. Press
OK
to return to the
OPTIONS
menu.
When the AccuScreen PRO is switched off and then switched on
again, all activated parameters and data are available unchanged.
In total you can save the data of approximately 250 patients and ap-
proximately 250 tests, depending on the tests being used (TEOAE,
DPOAE or ABR).
When 80% of the memory is used, a warning message appears. From
this point on, you can carry out approximately 20 tests before the
memory is completely full. Every 5 tests after the first reminder, the
percentage of memory used will be displayed again.
Download data to AccuLink as soon as possible.
When you have downloaded data to AccuLink, you must delete the
data in the AccuScreen PRO. To do so, see
Section 10.2, ‘Delete data”
on page 68 .
11.6 Version information
1. Select SW/HW information from the OPTIONS menu.
The SW/HW INFORMATION screen shows information use-
ful when you contact your service department, distributor,
etc.:
• The type of software
• The software version
• The software release date
• The serial number of the device
• The date of the last calibration
• The recommended date of the next calibration
2. Press OK to return to the OPTIONS menu.