otometrics ABR Screener User Manual Download Page 73

Page: 73 / 108

9.2

Time and Date setting

1. Press the

Time and Date

button on the

Settings

screen.

You can set the date in the upper part of the

Settings

and the time in the lower

part of the

Settings

Note

•

If you leave the

Time and Date

screen by pressing the

button, the set-

ting of seconds is set to zero.

2. Press the arrows to select the day (DD), month (MM), year (YYYY), hours (HH) and

minutes (MIN).

3. Press the

Tool

button to change the date and time formats.

–

Date format

Select from the list how the date setting is to be shown on the screen.

–

Time format

Select from the list how the time setting is to be shown on the screen.

Otometrics - MADSEN AccuScreen

9 AccuScreen settings

Summary of Contents for ABR Screener













































































































Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands

otometrics ABR Screener, User Manual

Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands