otometrics ABR Screener User Manual Download Page 42

Page: 42 / 108

Calibration and speaker test are performed before the actual test starts.

Calibration

If the probe does not fit correctly, adjust the position of the probe.

Speaker test

The calibration is followed by a speaker test to make sure that the two speakers func-
tion correctly.

The test starts automatically when calibration is completed.

“Incomplete” message

If the message

Incomplete

appears:

•

Refit the probe and make sure that it fits correctly.

•

Press the

Start

button to restart the test.

5.3.3

The DPOAE test

The test as it progresses is shown on the display. The test ear and the frequency cur-
rently being tested is shown at the top of the screen.

See the

Test details

table below for a description of the bar chart and other data dis-

played.

Otometrics - MADSEN AccuScreen

5 Testing with AccuScreen

Summary of Contents for ABR Screener













































































































Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands

otometrics ABR Screener, User Manual

Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands