S
ETTING
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
82
3.
Select the weld joint that needs to be changed.
4.
Turn the screen operation knob to select the plate thickness value, and press the knob.
5.
Turn the screen operation knob to adjust the plate thickness, and press the knob.
6.
Press the MENU key or CANCEL key.
⇒
It returns to HOME screen.
T I P S
• There is an upper and lower limit for the plate thickness that can be set.
• The WELDING GUIDE function cannot be used depending on the combination of welding
conditions.
• The WELDING GUIDE function cannot be used when an analog remote control (optional
accessory) is connected.
●
Turn the screen operation knob to place the cursor on the
parameter that needs to be set, and press the knob.
⇒
Change of the weld joint is confirmed, and the screen
returns to the WELDING GUIDE screen.
•
To cancel the setting, press the CANCEL key.
⇒ ▲
and
▼
will be displayed above and below the plate
thickness value, and the value becomes adjustable.
⇒
Welding current will be set automatically according to the
WELD JOINT and plate thickness.
⇒
The welding current is displayed on the left digital meter.
⇒ ▲
and
▼
, displayed above and below the plate thickness
value, will disappear.
⇒
The plate thickness setting is confirmed, and the screen
returns to the WELDING GUIDE screen.
⁐᥋⥅ᡭ
㔜ࡡ
㝮⫗
0,/'67((/
ȭ
67$1'$5'
&5$7(5),//21ZLWKSXOVH
,1,7,$/&21',7,21
6<1
:(/
',1**8,'(
:(/'-2,17
/$3-2,17
7-2,17
&$1&(/
6(/(&7
(17(5
:(/',1**8,'(
:(/'-2,17㸸7-2,17
LQFK
+20(
6(/(&7
(17(5
:(/',1**8,'(
:(/'-2,17㸸7-2,17
LQFK
+20(
6(/(&7
(17(5
